Report Up To 1.47% Copper On The Ram Creek Copper Occurrence
Fabled Copper Corp. (“Fabled Copper” or the “Company”) (CSE: FABL; FSE: XZ7) announces the 13th set of results of 2021 surface field work on it’s Muskwa Copper Project comprised of the Neil Property and the Toro Property in Northern British Columbia. The Company also holds rights to the Bronson Property. See Figure 1 below.
Figure 1 – Location Map
Peter Hawley, President, CEO reports; A total of 19 specific areas were mapped and prospected during the 2021 field season plus 5 select areas for UAV drone surveys. See Figure 2 below.
Figure 2 – 2021 Neil Property Work Site Locations
A total of 19 specific areas were mapped and prospected during the 2021 field season and we started the New Year by reporting our findings on the Lady Luck occurrence in the south end of the Neil Property, followed by the Mac; the 8A, Harris, the 2a and 2b, the Creek, Keays south, Belcher Creek, Magnum Drone Survey Mission, the Magnum, Neil Drone Survey Mission, Neil vein / breccia, EM-1 and now the Ram Creek copper occurrence. See Figure 3 below.
Figure 3- Neil Property, Ram Creek Copper Occurrence Location
Ram Creek Occurrence
The area containing the Ram Creek Occurrence had ten chip samples and 1 example of mineralized quart-carbonate collected. See Table 1 and Figure 4 below.
Figure 4 – Ram Creek Sample Locations
Two quartz-carbonate veins and surrounding sheared stockwork outcrop on the north side of a ridge at the 1,800 meter elevation and located on the south side of a bowl. See Photo 1 below.
Photo 1 – Ram Creek Copper Occurrence
These 2 veins were chip sampled across 2.65 meters. The chip samples contained less than 2% sulphides and this section (samples D-723006 - 010) across 2.65 meters assayed low in copper (0.15%), with the best copper result of 0.74% copper across 0.40 meters, (sample D-723007). See Table 1 and Photo 2 below.
Photo 2 – Chip Sample Location of Ram Creek Copper Occurrence Over 2.65 meters
North of these two veins, numerous sheared northwest to northwest striking quartz-carbonate veins, containing little or no sulphide content, were observed at elevations of approximately 1,800 meters.
Five veins were chip sampled and copper analyses indicate they contained trace copper (<0.09%). See Table 1 and Photo 3 below.
Photo 3 -Chip Sample Site of Ram Creek Copper Occurrence
Sample D-723016 of quartz-carbonate float, mineralized with 4% chalcopyrite, was collected across the bowl, 120 meters north of the exposed vein on the ridge. This sample had a copper content of 1.47%.
Mr. Peter J. Hawley, President and C.E.O.
Fabled Copper Corp.
Phone: (819) 316-0919
Disclaimer: Fabled Copper is a paid marketing client*